 |
Sectional Breeding System:
Design Your Own Aviary!
|
If you are a commercial business or a serious pet owner requiring many strong well-built cages for primates, dog kennels, reptiles, or breeding cages for parrots, our Sectional Caging system is our best solution.
The above structure was assembled using two of the 5 ft. X 8 ft. basic units with divider panels and accessory doors added; it measures 5 ft. X 16 ft. The individual area of each cubicle is 4 ft. X 5 ft.
Wire is available in either 3.0mm (thicker than 12 gauge) with 1/2 inch X 4 inch bar spacing or; heavier 4.0mm (thicker than 8 gauge) wire with 3/4 inch X 4 inch bar spacing. The roof is a 1 inch square tube frame and wire mesh construction, hand welded just like the side panels. Solid “A” frame roofing is also available as an accessory. All parts are fully galvanized after welding (GAW) fabrication for maximum rust protection and then powder coated with tough non-toxic material that is also UV protected. Stainless Steel is available by special order.
At the end of this tutorial you’ll be invited to build your own caging needs using the three pre-packaged panel sets that make the basic 5 ft. X 8 ft. unit as well as dozens of other combinations. And yes, our safety catches fit the door panels in this section. The prices listed in this section include free shipping with a 350 lb. minimum order. So, it’s easy to purchase online for small caging needs. Note: If you are building a whole cage, shipping and handling is included. If you are only purchasing a panel, you will be responsbile for shipping and handling, please call the office at 1-800-941-2243 so a sales rep can give you your calculated shipping total.
It's Simple! Here's How!
Section 1
 |
The three modular panel sets for this system are shown above, separated by color. One each of these sets creates the basic 5 ft. X 8 ft. unit pictured on the left.
If for example you wanted a 5 ft. X 16 ft. cage, you would purchase two (2) of the Side & Roof Panel packages, one (1) of the Front Panel Packages, and one (1) of the End/Divider Panel packages.
|
When creating multiple side by side caging units shown above, use only the Side and Roof Panel Packages and the End/Divider Packages. For access or entry, use any one of our three sizes of access doors. These accessory doors are mounted anywhere you like (the side panels in this case) by simply cutting the wire and easily attaching the access door to that selected panel. For example, the four cage unit pictured above was created using:
Two (2) Side and Roof Panel Packages
Five (5) End/Divider Panel Packages
Four (4) Accessory Access Doors(21” X 60”)
Section 3
Section 4 - Build it! Click the picture below to custom-build your aviary.